10/100M Ethernet double fiber managed Media Converter

3onedata Managed Media Converter is a 10/100Base-TX auto negotiation and auto MDI/MDIX
cable selection Fast Ethernet Media Converter with intelligent network management
that translates transmission signals from a twisted-pair 10Base-T or 100Base-TX
cable to 100Base-FX fiber optic cable. It enables network managers and network
operators quickly isolate problems without visiting multiple wiring closets,
avoiding expensive downtime. With its SNMP manager, user can monitor and configure
the Copper Port and Optical Port of center chassis and remote standalone
easily. Besides, user can control the bandwidth rate limiting as N*32Kbps.
Features

Hardware Function

1. Support 10Base-T, 100Base-TX, 100Base-FX

2 .Fully compatible with IEEE802.3, IEEE802.3u, IEEE802.3x st andards

3. Up to 5km distance on multi mode optical port and 120km distance on single mode optical port
4. High-performance auto-negotiation chips make sure the data transfer with higher
5. Security, stability and without block.

6. Up to 1916 bytes package forwarded

7. Support half/full duplex mode Auto-negotiate

8. Low power consumption, low heat generation and excellent compatibility

9. 10Watt professional communication power supply module inside the standalone.

10. Chassis supports double redundant power supply modules and each power supply
module
11. Supports up to 100 Watt power output for the security and stability

12. Support hot-swap for all the modules, but not including management module

13. Single-strand/dual-strand optical module selectable, SC optical port slectable
and standalone/16-slot chassis selectable

Software Function

1. Support local and remote management

2. Support Console, WEB and SNMP management

3. Show details of system information, including chassis name, location information,
IP address, start-up time, software and hardware version
4. View & configure the working status of local chassis and remote standalone device,
including connection status, speed, half/full duplex mode, port status
5. Set the speed limitation from 0Mbps to 70Mbps by step of 32Kbps

6. Support remote loop back function, three loop back position selectable. Help to
find out the line fault conveniently
7. Summarize the data flow information and show the communication state of each port
8. Support SNMP management. Set Trap Destination and Community Name, including the
authority
9. Reset the system or a single module or the remote end device via management software
10. Reset chassis to factory default

11. Support online firmware upgraded

12. Show the detailed information of power supply, including AC/DC type and running
status
13. Provide MIB file, make it easy to be integrated into the third party SNMP management
software
14. Adopt the centralized management style and the tree-view catalogue, which can
manage many sets of chassis at the same time in one single window. Meantime, it's
very easy and clear to manage all devices even if many chassis in one window.