Industrial RS-232/485 or RS-232/422

SW485C port-powered converters change TD and RD RS-232 lines to RS-485/422signals.
All are port powered and feature Automatic Send Data Control , can working if
only have TxD signal provide power. RS485/422 interface adopt beforhand aggravate
design, extend RS232 signal to 6000 feet at 115200Bps
1, Plug and play, small volume, easy installation

2, Port-powered, high efficiency obtain electricity,can also worked on

3 lines 3, RS232 to RS485 or RS232 to RS422

4, Lowest consumption

5, Automatic send data control, auto distinguish and sense direction adout data transfer
6, Auto sense serial signal rate, zero delay automatic transmit

Standard Accord EIA RS-232, RS-485, RS-422 standard

RS-232 signal TX, RX, GND

RS-485 signal D+, D-, GND

RS-422 signal R+, R-, T+, T-, GND

Asynchronism,point to point or multi point, 2 wire half-duplex, 4 wire full-duplex
Direction Automatic send data control, auto distinguish and sense direction adout
data transfer
Band rate 300-115200bps,auto sense serial signal rate

Loading Support 32 point loopback (can order 128 point)

Transmission RS-485 side 1200M(9600bps), RS-232 side less than 5M

Port protection 600W surge protection, 15KV static protection

Interface style RS-232 side DB-9 female, RS-485 side 5 terminal block

Working temperature -40 to 80

Storage temerature -40 to 85

Humidity Relative humidity 5% to 95% Input powered

No power supply needed, powered from TXD, RTS, DTR signal in RS-232 port
Consumption Static consumption less than 15mA, dynamic consumption less than 45mA

L*W*H 90mm*34mm*16.5mm

Shell Plastic

Color Black Weight 50g